Sony PSP: USB-C Mod

Description

The Sony PSP: USB-C is a board that allows you to replace the original MiniUSB connector with a modern and standard USB-C port.

If your original connector is too old or damaged and you need a new one, or if you would like to charge your Sony PSP with a standard USB-C charger, like the charger for your phone or laptop, you can do so with this kit.

This board is compatible with the following models:

• Sony PSP 1000
• Sony PSP 2000 ⁽¹⁾
• Sony PSP 3000 ⁽¹⁾
• Sony PSP E1000 (Street) ⁽¹⁾

⁽¹⁾ It is required to use the provided cutting template to slightly trim the USB-C metal shield with scissors. After that, it can be soldered onto the PSP mainboard. Refer to the installation manual for more details.

FEATURES

• Replace the MiniUSB connector with a USB-C, with data connection supported.
• Charge your Sony PSP with:
  • • USB power banks
    • USB-A chargers
    • USB-C chargers
    • USB-C PD chargers (normal speed, not fast)
    • USB-A to USB-C cables
    • USB-C to USB-C cables

INCLUDED

• 1 flexible board.
• 1 cable.
• 2 Cutting template stickers.

REQUIRED (NOT INCLUDED)

• Phillips screwdriver.
• Soldering iron / hot-air soldering station.
• Kapton tape.
• Tin.
• Flux.
• Solder Mask.
• Desoldering pump.
• Desoldering mesh.
• Tweezers.
• Scissors.
• Cutting pliers.
• Isopropyl alcohol.

NOTES

If the original connector is replaced, the option to use PSP accessories like the GPS module will be lost.

DOCUMENTATION

• Installation guide PDF
• GitHub repository